Fast installation, NO risk of FİRE
High-quality system press fittings from copper
System description
High-quality system press fittings from copper for copper pipes according to EN 1057 for drinking water and heating installations.
SANHA®-Press system fittings are well-known for outstanding quality, easy to work with and offer the right solution for a wide range of applications, be they residential, industrial or office buildings. They can be ideally combined with our unique PURAPRESS® series 8000 made of completely lead-free copper alloy silicon bronze or all standard copper pipes. They are outfitted with black moulded EPDM (=ethylene propylene dien rubber) sealing rings and conveniently sport the unique combipress® function (see below).
All system press fittings of our series 6000 are tested and certified by all relevant national and international certification bodies such as WRAS.
Material
Fittings and pipes made of copper, CU-DHP (material number CW 024 A).
Multi-Functional Performance: Thermal, Moisture, and Sound Control
In addition to thermal performance, many of our insulation products for cold and fresh water systems also offer moisture resistance and acoustic properties. This multi-functional approach ensures your water systems are protected not just from thermal loss but also from corrosion and unwanted noise. These solutions simplify installation, reduce material requirements, and increase system reliability.
From water pipes in walls to cooling systems in industrial plants, from underground distribution networks to residential plumbing, IDANAVAL® ensures every section of your cold and fresh water systems is well-insulated and fully protected.
Operating conditions SANHA®-Press from copper
| Water and aqueous solutions and technical gases (non-toxic, non-flammable), up to 108 mm | |
| Operating pressure | 16 bar |
| Operating temperature with EPDM | -30 °C – +120 °C |
| Type of thread: Pipe thread: R/Rp thread according to EN 10226, Fastening thread: G thread according to ISO 228 | |
Features
combipress® =
- tool compatibility: pressable with press jaws and slings with original SA, V and M contour up to and including 54 mm
- Leak path feature (certified forced leakage before pressing with EPDM and HNBR sealing rings) in combination with
- Push & Stay function for safe, reliable installation in every position
Fast installation, no risk of fire
The connection with stainless steel pipes by cold pressing enables a fast, time-saving installation and eliminates the risk of fire during the process. SANHA®-Press installation systems are therefore ideally suited for renovation work.
High corrosion resistance
The exceptionally smooth, passivated surface of pipes and fittings leads to an excellent corrosion resistance.
Exceptional flexibility
- All dimensions from 12 to 108 mm including 64 and 67 mm available
- Reliable, permanent connection with copper pipes according to EN 1057
- Thread according to EN 10226 and/or ISO7/1 Typ R und Rp
Areas of application
- Drinking water
- Heating / Cooling
- Compressed air (residual oil content max. 25 mg/m3 )
- Fire extinguishing systems (DIN 14462, wet)
- Shipbuilding
- Technical gases